|
|
BETA VCR REPAIR
SOME OF THE BETAMAX UNITS WE REFURBISH
Sony SL-HF400, Sony SL-HF300, Sony SL-HF500,
Sony SL-HF450,
Sony SL-HF900, Sony SL-HF1000, Sony SL-HF750, Sony SL-HF2000,
Sony SL-HF2100,Sony SL-HF360, Sanyo 7200,
Sanyo 4500, Sanyo 4800, Sanyo 4010, Sanyo4020, Sanyo 3900, Sanyo 4400
And many more!
 
I use Sencore Video Diagnostic Professional
Test Equipment For Best Possible
Service And Performance From Your VCR
Don't have a Beta VCR?
SEE OUR REFURBISHED BETA UNITS
FOR SALE BELOW
|
BETAMAX VCR REPAIR
Quality Too Good To Be New!
INTERNET VCR REPAIR OR REFURBISH
FREE ESTIMATES!
HOW DOES THIS WORK?
You pay for the shipping. I will check out your VCR and
give you an estimate of the repair costs for free!
(Select models only)
PARTS AVAILABILTY
Everyday we are finding it harder and harder to locate
new replacement parts for these classic units.
So if you need a Repair/ Refurbishment or just want to put your Betamax in
the best possible condition while we still can. I suggest you do it now
while most common parts are still available.
Scroll Down
FOR REPAIR CHARGES and
MORE INFORMATION
 
Credit Cards Accepted
Through PayPal
Checks and Money Orders also accepted
FREE ESTIMATES!
You pay for the shipping. I will check out your VCR and
give you an estimate of the repair costs for free!
(Select models only)
Scroll Down
FOR REPAIR CHARGES and
MORE INFORMATION
INTERNET VCR REPAIR
SEND ME YOUR BETAMAX VCR AND LET ME
PUT IT BACK IN TOP SHAPE!
FREE ESTIMATES!
You pay for the shipping. I will check out your VCR and
give you an estimate of the repair costs for free!
(Select models only)
I
AM ABLE TO REPAIR/REBUILD 98%
OF THE VCRS SENT TO ME
and return them to their
satisfied
owners for years more of service.
I have a
Maximum labor rate listed below
and do a complete refurbish of your VCR
when I do any work on it.
That way you have a very good idea
of the cost before you send it.
REPAIR CHARGES
VCR REPAIR CHARGES
(Internet Only)
ESTIMATE:
Free. I will examine your VCR and determine what repairs are needed
and the parts and labor costs. No work will be done without your
authorization. If you decide not to have
your VCR repaired. Or if it is un-repairable. I will ship it back to you.
You pay for the return shipping.*
BASIC LABOR:
Min $49.95 Max $145.00 (Complete cleaning
included. Parts extra)
PARTS:
Standard VCR tune-up kits $12.00 to $35.00(Belts, wheels, rollers etc.).
Exact parts cost, if any, will be part of estimate.
WARRANTY:
30 days labor, 90 days parts.
SHIPPING:
Costs average between $18.00 to 30.00 each way depending on weight of VCR,
distance shipped and shipping service used. UPS or FedEx or USPS You pay the
shipping both ways.
Basic preventive
maintenance.
$59.95
Even if your VCR is working at the present time. It is a good idea to
have your Classic VCR inspected and cleaned periodically to ensure it keeps
working and to head off any serious future problems. My min. $59.95
charge includes complete video head and tape path cleaning. I also inspect
your VCR for any problems I see or parts that may be about to become a
problem.
TURNAROUND TIME:
I try to contact you with an estimate within 3 to 4 days of receiving the
VCR. Repairs are usually completed within 1 week after estimate is approved.
(Depending on availability of parts).
Hopefully this brief overview will help you to decide if servicing your VCR
will be cost effective.
If you decide you want to have me repair your VCR. Please contact me before
shipping it to me so I can watch for it.
NOTE: Some Betamax VCRs are not going to be repairable. This is usually due
to the lack of available replacement parts or technical data Etc. If you
e-mail me with the model number and description of the problem. I can try to
determine if your VCR is repairable before you send it.
*Items that are not repaired will be shipped back to the customer. Shipping
costs paid by customer within 15 days of notification of no repair. Money
Order or Cashiers Check. Units left over 15 days will be disposed of due to
lack of storage space
E-MAIL
classic-guy-92@gmail.com
(take out the two dashes.
cut and paste into your
e-mail send box)
DID YOU KNOW?
It is usually much cheaper to have your Beta vcr refurbished than to buy a
refurbished unit
Mechanical Section
I carefully inspect the drive motors and other
moving parts in your vcr to ensure years of dependable service
Many VCRs have been stored away for years. This causes the rubber belts,
idler wheel tires and pinch rollers to dry out and become slick and
brittle. This is why the tapes won't play and also
why the machine will "eat" the tapes. If they work. They won't last
long.
Power Supply
Section
I check the power Supply Section for weak or defective components. Weak,
old or dried out
parts can cause poor quality video and/or loss of power to your VCR
Power Supply will be completely checked
out and old dried out capacitors and
other components replaced as needed.
Video Section
Using state of the art test equipment
I clean and align the video heads and
the tape path to factory specs.
Video Heads checked and
Aligned using Sony KR5-1V
Professional Alignment
Tape and Sencore Video
Waveform Analyzer
Your VCR will be completely dissambeled and
all parts and mechanisms inspected.
You will then receive an estimate detailing
the repairs and parts needed.
Above is an example of a typical problem with older Beta VCRs
The belts get old, deformed and brittle. The rubber tires get cracked and
slick from age and no longer grip. This causes the tapes not to play.
It also causes the VCR to "eat" tapes
The old parts are on the right you can see how out of shape they are.
Comments from some of our satisfied customers
Thanks for your help in getting my Sony Beta SL-HF400
VCR going again. I was able to transfer all of my home
movies to DVD. I even sold the VCR on eBay when I was
finished for more than it cost me for the repair!
THANKS! David M.
****
I picked up a Sony Betamax at a yard sale for $20.00 and it did not
work.
You were able to repair it for $122.52 and I have been enjoying it.
I see the same model Sony selling for $450.00 + on eBay. THANKS !!
****
excellent stands behind his vcr great deal! Ron
****
VCR works like new! So nice to see my old beta tapes again!!
****
Thanks for your work on my Beta. I had it repaired at a local shop
and it
worked better but still ate my tapes sometimes. You were able to find that
the reel
drive motor torque was weak causing the motor to have trouble pulling the
tape back in to the cassettes. WOW! Great work ! Julie Z.
We Accept Credit Cards Through PayPal
|
|
24 Years Experience
Repairing Betamax VCRs
The #1 Betamax
Service Center On
The Internet
E-Mail:
E-mail Me
For More Information
classicguy92@gmail.com
(take out the two dashes.
cut and paste into your
e-mail send box)
VHS & BETA tapes are
disappearing from the landscape as digital technology rapidly takes over.
But what to do with all those old home movies you have of
Aunt Edna at the family reunion in 1983. Or the kid's little league
games! Or That UFO that landed in your back yard New Years Eve 1981 !!
Transferring them to a DVD or your computer and from there to a DVD, is not
that difficult. There are plenty of sites on the internet to learn how.
But it all begins with getting the
best video quality possible.
Make sure you are getting the highest quality video signal you can for your
DVD recorder with one of my high quality CLASSIC VCRs.
Safely copy your
valuable VHS and BETA
Video tapes to DVD with My High End VCRS
DON'T TRUST THAT
BETA TAPE OF THE KIDS
AT CHRISTMAS IN 1979
TO ONE OF THOSE CHEAP VCRS !
VIDEO TAPE DEGRADES
AFTER A FEW YEARS AND
MAY BREAK OR GET
STUCK IN YOUR VCR.
GET ONE OF OUR
RECONDITIONED VCRS
TO COPY YOUR TAPES
TO DVD DEPENDABLY
THIS WEBSITE
HOSTED BY
The
first commercially successful VCR, which used a Betamax format, was
introduced in 1975
VHS
(Video Home System), was introduced in the same year and became the dominant
system
DID YOU KNOW?
It is usually
much cheaper to have your Beta vcr refurbished than to buy a
refurbished unit
|
